6TQWDNG
ᵡᵿᶓᶑᶃ
%QWPVGTOGCUWTG
ᵟ ᶇ ᶐ ᴾ ᵮ ᶇ ᶑ ᶒ ᶍ ᶌ ᴾ ᶂ ᶍ ᶃ ᶑ ᴾ ᶌ ᶍ ᶒᴾ
ᶍ ᶎ ᶃ ᶐ ᵿ ᶒ ᶃ ᵊ ᴾ ᶍ ᶐ ᴾ ᶐ ᶃ ᶒ ᶓ ᶐ ᶌ ᶑᴾ
ᶔ ᶃ ᶐ ᶗ ᴾ
ᶑ ᶊ ᶍ ᶕ ᶊ ᶗ ᵊ ᴾ
ᶍ ᶐᴾ
ᶍ ᶎ ᶃ ᶐ ᵿ ᶒ ᶇ ᶍ ᶌ ᶑ ᴾ ᶇ ᶑ ᴾ ᶌ ᶍ ᶒᴾ
ᶑᶋᶍᶍᶒᶆᵌ
1 Inside of the cylinder is dirty so
that the air piston cannot return to
its proper position.
Clean inside the cylinder, and apply
grease inside the cylinder and to the
O-ring.
䚷
(Refer to page 15 )
2 Insufficient and expressure of
supplied air.
Adjust the air pressure.
䚷
(Refer to page 10 )
ᵲ ᶆ ᶃ ᴾ ᶑ ᶓ ᶁ ᶒ ᶇ ᶍ ᶌ ᴾ ᶎ ᶍ ᶕ ᶃ ᶐᴾ
ᶇᶑᴾ ᶕᶃᵿᶉᴾ ᵿᶌᶂᴾ ᶒᶆᶃᴾ ᶁᶓᶒᴾ
ᶋ ᵿ ᶌ ᶂ ᶐ ᶃ ᶊ ᶑ ᴾ ᶁ ᵿ ᶌ ᶌ ᶍ ᶒ ᴾ ᶀ ᶃᴾ
ᶂᶐᵿᶕᶌᴾᶍᶓᶒᵌ
1 The air outlet is blocked.
( e.g. there is an obstacle at the
end of the Chute Hose [ mandrel
outlet ]. )
Adequate space should be left at the
end of the Chute Hose so that mandrels
can exit.
2 The guide pipe is clogged with
mandrels.
Take out the Guide Pipe, and remove
the clogged mandrels.
( Refer to page 12 )
3 Insufficient and expressure of
supplied air.
Adjust the air pressure.
䚷
(Refer to page 10 )
4 Suction power lowered due to dirt
in the Nozzle.
Contact your nearest Lobster distributor.
When using stainless rivets, the Jaws, Jaw pusher and Jaw pusher spring will need early replacement.
Please replace the spare parts for adequate riveting.
Use only clean hydraulic oil, as the viscosity of the oil used will affect tool performance.
‘‘LOBSTER’’ brand Hydraulic Oil is supplied in a plastic filler bottle with the tool, and can also be
obtained from your ‘‘LOBSTER’’ dealer or agent in your town. If this is not possible, a good quality
mineral oil with the following properties should also be used.
Ṹᴾᵡᵿᶓᶒᶇᶍᶌᴾᶕᶆᶃᶌᴾᶓᶑᶇᶌᶅᴾᶑᶒᵿᶇᶌᶊᶃᶑᶑᴾᶐᶇᶔᶃᶒᶑᵌ
Ṹᴾᵡᵿᶓᶒᶇᶍᶌᴾᶍᶄᴾᶓᶑᶇᶌᶅᴾᶆᶗᶂᶐᵿᶓᶊᶇᶁᴾᶍᶇᶊᵌ
䠍䠕
RECOMMENDED OILS are:
Shell Tellus
䚷
No.46
Esso Teresso No.46
Mobil D.T.E. 25 Oil(Medium)
㻌
ᒍᛖᾔ
ᾝ
ᾖ
ᾛᾘ
ᾢ
ᾗ
Viscosity
㻌
ISO
㻦
O
㻦
VG46
Viscosity
㻌
Index
㻦
113
Viscosity at 40
䉝
㻦㻦㻦㻦㻦㻦
㻦
46 c.s.t.
Viscosity at 100
䉝㻌㻌㻌㻦
7.06 c.s.t.
Flash Point
㻦
228
