Figures 7, 8 and 9: in sequence, showing the first Dlog steps to set up a Piconode through Dlog app.
Step 2: DLog main menu
1.
Node info - Contains basic information about the node, such as version, ID, or temperature
2.
Sensors data - Access to real time sensor readings and downloaded data stored in the node
3.
Node Configuration - Access this menu to configure the node
a.
Change node ID - this is optional and allows you to change the node ID and use a different
number
b.
Set the date and time - this information will be taken from the mobile phone or the laptop in use
c.
Setup wizard - sensor and radio configuration
d.
To access node configuration, on the main menu go to Node configuration and then select Setup
Wizard
6
