LOAD KING 35-127 M, Operator'S Manual, Page: 168 / 216

168
35-127 M
Maintenance
Transmission storage
PRESERVATIVE SELECTION
It is recommended that the highest viscosity monograde lubricant available be used for the anticipated
ambient temperature� Typically this will be a Cat TO-4 qualified lubricant� When large swings in ambient
temperature are probable J20 C, D multigrades are recommended� Multigrade lubricants should be
applied at the lower viscosity rating for the prevailing ambient temperature i�e� a 10W20 should be used
where a 10W monograde is used� If a C-4 multigrade is used in place of J20 lubricant it is recommended
that the viscosity be no more than 10 points, i�e� 10W20�
STORAGE
If the transmission is to be stored in excess of 60 days before being put into service, the units should be
completely filled with the lubricant specified above and stored in a dry area� It is also recommended that
at least every 30 days all flanges be rotated by not less than two complete turns to insure complete
lubrication of the seals�