EN
LMP Keyboard ProtectCase for iPad 10.2''
Quick Start Guide
Multifunctional Keys
Caps Lock
indicator:
Light on means uppercase letters; light off means lowercase
letters
Wireless
status:
Press „Fn+C“ to perform the pairing between iPad and keboard.
The LED will turn off when the connection to the iPad has been
sucessfully established.
Battery
status:
A flashing light indicates a low battery level. Constant light me-
ans charging. Green light means fully charged.
LED Status Indicators
Keyboard Pairing
1) Switch on the iPad, then pair the Bluetooth keyboard.
2) Move the on/off switch to the ON position, then press „Fn+C“ to
perform the pairing. The LED will turn off when the connection to the
iPad has been successfully established. If the connection has not
been established within 3 minutes you need to repeat the pairing
process from the start.
3) Select „Settings“ => „Bluetooth“. Make sure that Bluetooth is turned
on.
4) Select under „OTHER DEVICES“ the „LMP BT Keyboard“.
5) A 4-digit numeric code is displayed on the screen. Type in the num-
bers on the keyboard and press „Enter“ on the keyboard to confirm.
6) The pairing has been successful when „LMP BT Keyboard“ is listed
under „MY DEVICES“ in the Bluetooth settings.
7) In case the pairing has failed, repeat the pairing process from 2.
Connection Problems
1) Make sure the keyboard is turned on and the battery is charged.
2) Make sure the keyboard is close to the iPad.
3) Make sure that Bluetooth is enabled on the iPad.
4) Make sure the keyboard has been paired with the iPad.
Maintenance
1) Keep the keyboard away from liquids and magnetic fields.
2) Use a soft cloth to clean the keyboard.
3) When not in use, switch off the keyboard.
Home
screen
Brightness -
Brig
Search
iPad keyboard
Change language
Previous song
Play/pause
Next song
Mute
Volume -
Lock-
screen
Mounting the Stand
1) Pull the magnetic flap
backwards. Push the center
of the stand outwards.
2) Put the magnetic flap over
the stand holder.
3) The stand is now firmly
locked.
Battery status LED
Wireless status LED
LMP v2.2, 2/2020
Caps status LED
Bluetooth pairing
