LMI Gocator 2000 Family, User Manual

Page: 94 / 194

94 Gocator 2000 Family
Output
Gocator sensors can transmit laser profiles and/or measurement results to a variety of external devices
using its rich I/O options. This chapter describes the steps to configure each supported output interface.
Output Page
Output configuration tasks are performed using the Output Page.
1 2 3 4 5
Element Description
1 Ethernet Panel Use the Ethernet Panel to select the data sources that will be transmitted via Ethernet.
2 Digital Output 1 Panel Use the Digital Output 1 Panel to select the data sources that will be combined to
produce a digital output pulse on Output 1.
3 Digital Output 2 Panel Use the Digital Output 2 Panel to select the data sources that will be combined to
produce a digital output pulse on Output 2.
4 Analog Panel Use the Analog Panel to convert a measurement value or decision into an analog
output signal.
5 Serial Panel Use the Serial Panel to select the measurements that will be transmitted via RS-485
serial output.