16
recommended that a 16 sensor system uses a +48V power supply capable of delivering
16A.
The Phoenix QUINT series power supplies are DIN rail mounted devices that can be
connected in parallel to increase the overall available power.
+48 VDC
Model:
QUINT-PS-100-240AC/48DC/10
Order number:
2938248
3.1.5
Station Computer
The Station is a user-supplied PC used to process data from the sensors and to
interface with the client PC. The software that runs on the station performs three key
roles:
•
Data processing through the
kServer
application.
•
Management of the
kServer
process through the
kManagementServer
application.
•
Diagnostic logging of the system through the
kDashboard
application.
Multiple stations can be used in a system. However, for multiple station systems, the
firmware and software upgrade package must be run individually per station.
Requirements
•
Minimum 2x gigabit (1 Gbps) Ethernet ports (Recommended: Intel PRO/1000
Network Adaptor or equivalent, x2)
•
Pentium 4, Pentium D, or Pentium Core Duo at 2.0 GHz or above
•
Minimum 2 GB of RAM
•
Minimum 10 GB of Hard Disk Space
•
Windows XP SP3 32-bit or Embedded XP, Windows 7 Professional 32-bit or 64-
bit*
•
Any firewall software must be disabled
•
The network card driver should be updated to the latest available version
•
USB 2.0 ports (recommended)
*While Windows XP is technically supported, Embedded XP is strongly
recommended. Windows XP lacks the capabily to support a hard power-down
situation and it will be the responsibility of the user to initiate a proper shutdown
process every time power disconnected.
IN Port
The IN port is a Gigabit Ethernet link to a Master. It communicates on the sensor
(Private) network.
The IN port IP address should always be on the 90.X.X.X subnet. This address can be
changed by sending a “Set Private IP” command to the Station, which is done, typically,
to support multiple station configurations. The valid addresses are 90.0.0.1 to 90.0.0.5.
The default IP is 90.0.0.1. A typical configuration is:
Summary of Contents for chroma+scan 3155
