Connect the Power/Ethernet to Master Cordset to the Master 100
• Plug the Power/Sync (black cord) RJ45 end of the
Power/Ethernet to Master Cordset
to the
Power port on the
Master 100
.
• Plug the Ethernet (yellow cord) RJ45 end of the
Power/Ethernet to Master Cordset
to the
Ethernet port on the
Master 100
.
Connector the Sensor Trigger Cordset to the Master 100
• If an unwired green connector is already connected to the
Master 100
, remove the green
connector from the
Master 100
.
• Connect the green connector end of the
Sensor Trigger Cordset
to the Sensor I/O port on
the
Master 100
.
Connect the black
cord first
Connect the yellow cord
after the black
Remove any unwired
green connector before
connecting the Sensor
Trigger Cordset