LMI Technologies GoMax Smart Vision Accelerator, User Manual, Page: 42 / 47

Share

27 pages before
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47

Page: 42 / 47

LMI Technologies GoMax Smart Vision Accelerator User Manual Download Page 42

GoMax Smart Vision Accelerator: User Manual

42

Return Policy

Return Policy

Before returning the product for repair (warranty or non-warranty) a Return Material Authorization
(RMA) number must be obtained from LMI. Please call LMI to obtain this RMA number.

Carefully package the GoMax unit in its original shipping materials (or equivalent) and ship the unit
prepaid to your designated LMI location. Please ensure that the RMA number is clearly written on the
outside of the package. Inside the return shipment, include the address you wish the shipment returned
to, the name, email and telephone number of a technical contact (should we need to discuss this repair),
and details of the nature of the malfunction. For non-warranty repairs, a purchase order for the repair
charges must accompany the returning unit.

LMI Technologies Inc. is not responsible for damages to a unit that are the result of improper packaging
or damage during transit by the courier.

«
...
40
41
42
43
44
...
»

Summary of Contents for GoMax Smart Vision Accelerator
















































Reviews:

No comments