LMI Technologies Gocator 2130, User Manual, Page: 363 / 652

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 364
Element Type Description
MultiplexBuddyEnabled Bool Enables multiplexing for buddies.
MultiplexSingleEnabled Bool Enables multiplexing for a single sensor configuration.
MultiplexSingleExposureDur
ation 64f Exposure duration in µs (currently rounded to integer when read by the
sensor)
MultiplexSingleDelay 64f Delay in µs. (Currently gets rounded up when read by the sensor.)
MultiplexSinglePeriod 64f Period in µs. (Currently gets rounded up when read by the sensor.)
MultiplexSinglePeriod.min 64f Minimum period in µs.
Element Type Description
X 64f X start (mm).
Y 64f Y start (mm).
Z 64f Z start (mm).
Width 64f X extent (mm).
Length 64f Y extent (mm).
Height 64f Z extent (mm).
ZAngle 64f Z Angle start (degrees).
ZAngle.used Bool Whether or not this property is used.
Region3D Child Elements
Element Type Description
ColumnCount 32u Column count.
ColumnCount.value 32u Column count value.
Grid Elements
Alignment
The Alignment element contains settings related to alignment and encoder calibration.
Element Type Description
@used Bool Whether or not this field is used
InputTriggerEnabled Bool Enables digital input-triggered alignment operation.
InputTriggerEnabled.used Bool Whether or not this feature can be enabled. This feature is available only
on some sensor models.
InputTriggerEnabled.value Bool Actual feature status.
Type 32s Type of alignment operation:
0 – Stationary
1 – Moving
Type.options 32s (CSV) List of available alignment types.
StationaryTarget 32s
Stationary alignment target:
0 – None
Alignment Child Elements