83
3 Maintenance and Service
If there are any questions on maintenance and service, please contact LMI by submitting a technical support request
through
(recommended) or by email at
The system is nearly maintenance-free and does not need daily or weekly maintenance other than keeping the system
clean.
3.1 Continuous Maintenance
It is a good practice to monitor the machine operation during daily use. Any abnormal function, movement, smell,
sound or incorrect performance should be noted and addressed immediately.
The machine and its surroundings should be kept clean. For safe use the measurement table surroundings must be
kept clear of anything that may block the table movement and the table should be kept free of any items not needed in
the current measurement work.
3.2 Monthly Maintenance
Monthly maintenance includes visual, mechanical and electrical checking of the machine components and cleaning all
surfaces. Monthly service should be recorded in the service log.
Wipe off oil residue on the Z axis rail ends monthly. The rail ends are indicated with arrows, in the figure below:
Note:
Electrical checks involving access to the electrical cabinet must only be performed by a certified electrician.
Figure 93 Rail Ends
