LORI Stander edition 2
page 7
7.
Detailed description of the construction and adjustments of the LORI Stander
CAUTION!
After each adjustment, it is crucial to make sure that all assembled and
adjusted elements are properly mounted and secured.
Assembly of the stander
CAUTION!
When assembling the frame, special attention should be paid to the
possibility of limbs being trapped by moving parts.
CAUTION!
After assembly of the device, make sure that all adjusting screws are tight.
Loose components may cause the adjustable components to move automatically, which
may result in patient injury.
The Stander is delivered in two parts: standing frame and column. In order to assemble the standing
frame, perform the following actions:
7.1.1.
Disassembly of the frame
To disassemble the frame, first unscrew the screws (1), then set the frame support (2) in the correct position. After setting
the frame support, the previously unscrewed screws (1) should be screwed to the frame through the support openings.
Figure 3
7.1.2.
Installation of the column - Figures 4 and 5
To install the column on the standing frame, first unscrew the screws (1) and then place the pin (2) in the opening of the
system profile holder (3). When aligning the column, make sure that the distance between the foot platform supports and the
frame profiles (see Fig. 5.) is even. The last step of the installation is tightening the frame to the column with the previously
unscrewed screws (1).