User manual
3
•
Under setting state, you may return to normal time display by pressing MODE key once or pressing no key for
1 minute.
•
If you keep pressing the TIMER key under timer mode, the timer will pause / continue repeatedly. If the timer
is paused, you may press UP key to clear the setting to zero.
Temperature Mode:
•
Display of the current environment temperature. Under display of normal time, you may press DOWN key to
switch between Celsius / Fahrenheit scale. The normal measuring range is 0℃-50℃ (32℃-122℃).
Natural Sound Demonstration:
•
Press SOUND key to activate the natural sound demonstration function. The initial natural sound is flowing
water and animal sound. Press SOUND again to stop the demonstration and press it another time to switch
to the second natural sound
(sound in forests). In this way, you can select 6 different natural sounds (The
third is flowing water, the fourth is flowing water and birdcall, the fifth is the seagull and sea wave sound,
and the sixth is the compilation of the first five
sounds
)
. What is displayed on the Date position is the
number of music, and what is displayed on Time and Week position is the remaining minutes and seconds
for play of the current music under demonstration.
Music Timing Function:
•
You may press TIME key to set the time length of the music. The initial is 10 minutes. Press it again to select
20 minutes. You may also select 30 minutes, 40 minutes, 50 minutes and 1 hour, up to six at your option.
Color Backlight Function:
•
When pressing SOUND key to demonstrate the music, the colors will change repeatedly for four times
before they are stopped. Pressing any other key, one color will change with each press and will light up for 5
seconds before it is stopped automatically.
Projection for Time:
•
When you press the top round ball, there will be time projection, and the projection will power off
automatically 5 seconds later
•
Time projects on the ceiling of a darkened room
•
Maximum projection distance: 3.3 meters
REMARK
•
In case of abnormal
display, please take the batteries out and put
them in 1 min later.
•
If you find that
the characters on screen become thin or unable to demonstrate the natural sounds after a
long time of use, you shall need to replace the battery. You may remove the battery over and replace with a
new battery of the same model according to the polarity indication.
