User manual
2
Time Setting:
•
Under normal time, you may press SET key to enter Time and Date setting, respectively setting the Hour,
Minute, Year, Month and Date to normal time.
•
Press SET key. The Hour will begin to blink. In this case, press UP or DOWN key to adjust the time up or
down. Then, keep pressing SET key and use UP or DOWN key to adjust the minute, year, month and date to
normal time display (The week will automatically change with the date setting).
•
Under setting state, you may also press MODE key twice to exit the setting. You will also exit the setting if
not pressing any key within 1 minute.
12/24 Mode Switch:
•
Under normal time, you may press UP key to switch 12 / 24-hour display format.
Alarm and
Snooze
:
•
Under normal time, press MODE key to enter Alarm and
Snooze
(Mark: ALARM).
•
Press SET key again. The Hour will begin to blink. In this case, press UP or DOWN key to adjust the time up or
down. Then, keep pressing SET key and use UP or DOWN key to adjust the minute, Sleep Late interval time
(Snooze) from 1 to 60 minutes, and then press SOUND key to select from 6 natural sounds alarm music and
return to alarm time.
•
Under setting state, you may return to normal time display by pressing MODE key once or pressing no key
for 1 minute.
•
Under alarm time, you may use UP or DOWN key to activate the alarm (Mark: “(((·)))”) and snooze mark
“Zz”.
•
When the alarm clock reaches the preset time, it will ring for 2 minutes. When reaching the Sleep Late
interval time (Snooze), the alarm clock will ring twice and last 2 minutes for each ring. Press SET key to
cancel the ring or press any key to pause.
•
When the mark of alarm and sleep late is not activated, i.e. the alarm and
snooze is
desactivated
,
the alarm
clock will not ring even reaching the preset time. Likewise, the snooze is disabled if only alarm mark is
activated. To enable the snooze function, the alarm and snooze marks must be activated simultaneously.
Timer Mode:
•
Under any of the state, press TIMER to enter countdown timer mode. The default time on display is 23 : 59 :
59.
•
Press SET key to enter setting, in which case the Hour begins to blink. You may press UP and DOWN to adjust
the time up or down. Keep pressing SET key and use UP or DOWN key to adjust the minute and second.
•
After completing the above setting, press TIMER to return to timer mode and then press TIMER again so that
the current seconds will begin to decrease. When the timer reaches 0 second, the preset minute will begin to
decrease. Likewise, when the timer reaches 0 minute, the preset hour will also begin to decrease. When the
timer reaches 00 : 00 : 00, the alarm clock will ring for 1 minute. (If under timer mode now, the 00 : 00 : 00
displayed on the screen will blink).
•
To stop the alarm ring before end, you can press MODE or SET or TIMER key.
•
Range of setting: 23 – 0 for hour; 59 – 0 for minute and 59 – 0 for second.
