User Manual
5
TECHNICAL DATA
Hair dryer:
Hair straightener:
Voltage: AC 220-240V 50-60Hz
AC 110-240V 50-60Hz
Power: 1700-2000W
35W
CLEANING AND STORAGE
Never use any abrasive cleanser or solvent.
Never immerse appliances in water.
Remove the mains plug from the mains socket after use and let
the appliance cool down well before cleaning and storing.
Hair dryer:
1.
Clean the different parts of the appliance with a damp cloth.
2.
It is important to keep the Air inlet free from hair and lint.
3.
Use the power cord loop to hang the appliance.
Hair straightener:
Clean the different parts of the appliance with a damp cloth.
Now you can store these appliances on the supplied Nylon
carrying case.
Before use of these two appliances, ensure you they are clean of dust or dirt.
Before use of your hair straightener, your hair must be clean, dry, tangle free and free of any chemical
haircare.
HAIR DRYER USE
Always ensure the switch is set to OFF position before plugging.
Use high setting for drying hair, and use low setting for styling.
If the hair dryer stops for any reason, unplug it from the mains socket and let it cool down.
Temperature switch: Low warm / Middle hot / High hot temperature
Speed switch: 0= OFF position / 1= LOW: low speed / 2= HIGH: high speed
Cool shot: Press cool shot switch to have comfortable cool wind.
Use the concentrator to focus on a small area or when you want to relax curly hair.
Switch off when finished using, then remove the plug from the socket.
Note: To avoid overheating, do not concentrate heat on one section for too long.