LiveU LU60, User Manual

Page: 76 / 146

LiveU Live Video Uplink System User Guide
76
•
Interface Name: Detected network’s name.
•
Signal Strength: Signal strength (RSSI level).
•
BW kbps.
•
Delay in seconds.
•
PKT%: Efficiency. This specifies the percentage of quality throughput. The
higher this value, the better.
•
Interface (A) or (B): The LU60/LU70 products that support dual SIM are
provided with modules. A module has two rows of SIM cards: A and B. Two
SIM cards of each type are provided in these types of devices, one on each
row. Only one row of SIM cards is used at a time. This window indicates
the letter of the row (A or B) that is used, as follows:
Figure 54: Interface (A) or (B)
You may refer to Utilities section on page 98 for a description of how to
select which row of SIM cards is used.
Devices that only have a single row of SIM cards do not display a letter (A
or B) in this window.
•
Interfaces dropdown list: This dropdown list enables you to specify the
interfaces to be used for transmission. The following options are available:

Use All: Indicates that all interfaces are used for transmission.

LAN/WiFi Only: Specifies that only LAN and Wi-Fi interfaces are used.
This option disables all modems. When this option is selected, all the
Interface Status icons in the Interfaces window appear disabled.

Guaranteed Only: Indicates that only interfaces specified to use a
guaranteed bandwidth rate are used for transmission. This option only
applies to LAN interfaces, and not to cellular or Wi-Fi interfaces. For an
interface to be identified as a guaranteed-only one, its Guaranteed
rate checkbox must be checked, as described on page 78.
NOTE
In Use All mode, the minimum Custom Delay is 1.6 seconds. In
Guaranteed Only mode, the minimum Custom Delay is 1.4
seconds. For more details about setting the Custom Delay, see
page 52.