LiveU LU60, User Manual, Page: 108 / 146

LiveU Live Video Uplink System User Guide
108
Configuring Remote Control
The following is mandatory step that must be performed after installing the
Remote Control application in order to configure its connection to the required
LU-1000 server. This procedure connects the Remote Control application to
the LU-1000 server(s) to which the required LU devices report.
►
To configure Remote Control:
1 On the computer on which you installed the Remote Control application,
browse to the following folder:
C:\Program Files\LiveU\appData\RemoteControlHD\config\
2 Open the ServersData file using a standard text editor. For example, as
shown below:
Figure 88: Configuring Remote Control – 1
3 In the ServerData section, in the Name field, enter the free text name of
this LU-1000 server to appear in the Remote Control user interface.
4 In the IP field, enter the IP of an LU-1000 server that is connected to the
LU devices that you want to control.
5 In the Port field, enter the port number through which the LU-1000 server
(the one specified in the IP field) communicates with the Remote Control
application. The default port is 9200.