5
7. Insulation cover: Use the included insulation cover to hasten the
process of heating the water and also to keep the unit clean while
not in use. Do not use or attempt to use the cover while you have
your feet in the basin.
8. Handle and wheels: The handle on top of the device folds down
while not in use for your convenience, while the wheels at the
bottom of the device make it easy to transport from room to room.
9. Drainage hose: The included drainage hose clips to the side of
the spa while not in use, but when you unclip it and remove the
stopper from the end, you can conveniently drain out the water
without having to do any heavy lifting.
Using your Home Foot Spa
1. Add water to the basin until it reaches the fill line marked on
the inside.
2. Plug in the power cord to a 120V power supply.
3. Press the power button to turn the device on.
4. Use the + Temp button to increase the water temperature, and use the
– Temp button to decrease the water temperature. The available
temperature range is from 95°F (35°C) – 118°F (48°C).
5. If you would like to utilize the red lights, shower/calf massage, or vibrating
massage features, press the corresponding buttons on the control panel to
activate them. The corresponding indicator lights will light up when you are
using these so you can keep track of which features are in use at any time.
Press the button again to deactivate a feature.
6. Add a few drops of your preferred essential aromatherapy oils (optional).
7.
8.
9.
