LIVARNO LUX 284921 Assembly, Operating And Safety Instructions Download Page 10

10  GB/IE/NI

   Setting the daylight level

   Turn the rotary control LUX 

16

 on the bottom of 

the motion detector 

9

 clockwise to increase 

the daylight level. In position  , the motion  
detector only responds at pitch-black night  
(approx. 5 lx). In position  , the motion  
detector also responds at daylight levels, as 
long as about 20,000 lx are not exceeded.

   Orientating  the   

motion detector

   Loosen the fastening screws 

7

 of the motion 

detector 

9

.

   Turn the rotary control LUX 

16

 to position  . 

Orient the motion detector into the central  
region of the desired coverage area.

   Move about through the coverage area until 

you are satisfied with the response characteris-
tics of the motion detector. To find the proper 
orientation, change the position of the rotary 
control SENS 

17

 or the orientation of the  

motion detector.

   Re-tighten the fastening screws 

7

 to fix the ad-

justment.

   Turn the rotary control LUX 

16

 to the desired 

position. These can be determined during the 
dawn or twilight hours during which the spot-
light 

10

 should respond. Slowly turn the rotary 

control LUX 

16

 clockwise until it reacts to 

movement within the coverage area.

   Cleaning and storage

   Press the ON / OFF switch 

11

 into the OFF po-

sition if you will not be using the product and 
want to store it.

   Check the motion detector 

9

 and the solar 

cell 

12

 for dirt regularly. If dirt or is present,  

remove it to guarantee flawless function of the 
product.

   Especially during the winter, keep the product 

free from snow and ice.

   Clean the product with a lint-free, slightly moist 

cloth and mild cleaning agent.

   Troubleshooting

 =  

Fault

  =  Cause
  =  Solution

 =  

The product does not switch on.

 =  The ON / OFF switch 

11

 is in the OFF position.

 =  Press  the  ON / OFF  switch 

11

 into the ON  

position.

 =  The rotary rotary control LUX 

16

 is adjusted 

too dark.

 =  Adjust the rotary control LUX 

16

 so it is brighter.

 =  The motion detector 

9

 is dirty or is incorrectly 

oriented.

 =  Clean the motion detector 

9

 or reorient it.

 =  The sensitivity of the motion detector 

9

 is too 

low.

 =  Readjust the sensitivity of the motion detector 

9

 

(see section “Adjusting the sensitivity of the sen-
sor”).

 =  The rechargeable battery is discharged.
 =  Charge the rechargeable battery (see section 

“Charging the rechargeable battery”).

 =  

The product also switches on when it 
is light out.

 =  The rotary control LUX 

16

 is adjusted too bright.

 =  Adjust the rotary control LUX 

16

 so it is darker.

 =  

The light flickers.

 =  The rechargeable battery is almost discharged.
 =  Charge the rechargeable battery (see section 

“Charging the rechargeable battery”).

 =  

The rechargeable battery loses its 
charge after a short time.

 =  The plug connection of the solar cell 

12

 and 

spot light 

10

 has come loose.

 =  Refasten the plug connection at the product.
 =  The solar cell is dirty.
 =  Clean the solar cell.

Summary of Contents for 284921












































Reviews: