LiuGong CLG835H, Service Manual

Page: 496 / 764

4-224
Removal and Installation
January 24, 2017
Brake system CLG835H
Removal and installation of cooling motor
Removal of motor
Figures Operation instruction Tools
1. Remove fan guard and
bracket by referring to the
Power System - Radiator
Overhaul Manual;
2. Mark the hoses on the motor
respectively as: A port hose,
B port hose and T port hose.

The identification should be
clear, firm and not fall off.
3. Remove the plates of A port
and B port and T port hose.
Loosen the T hose joint with
wrench and remove the
hose joint after gentle knock-
down. Block the hose joint.

Unscrew A and B plate bolts
with wrench and then place
plate and bolt well after put-
ting them together and mask
joints.
Open-end
wrench: 13mm
and 17mm
P18H00359
P18H00360