Litionite A250, User Manual

Page: 9 / 12

How to recharge the power station
a. Wall chager
Plug in the charging cable into wall outlet,
then connect the other end to the 7909
input port(12) of portable power station,
the charging Indicator turns (3) green.
Place your solar panel where it can get as
much direct sunlight as possible. Connect
the solar charger by solar charging cable,
then plug the cable with 7909 connector into
the input port (12). You can know the charging
state (4) from the LCD display. It will stop
charging when the battery is full of energy.
b. Charging with solar panel
c.Charging with car
Plug in one end of the car charger to the car
cigarette lighter port, plug the other end to
the input 7909 port (12), the charging(3) and
(4) turns green.
1.For wall charging, recharge only with the charger specified by the manufacturer.
2.For solar charging, it is recommended to use solar charger as following specification.
-DC output: 9-24V MAX 72W
-Charging type: PWM
-Connector: DC male 7909 connector
CHARGING
AC ON AC OFF
DC ON DC OFF
AC
DC
CHARGING
AC ON AC OFF
DC ON DC OFF
AC
DC
CHARGING
AC ON AC OFF
DC ON DC OFF
AC
DC
08