INSTALLATION INSTRUCTION SUPPLEMENT
EXTREME
®
LED EMERGENCY EXIT SIGNS
WITH SELF-DIAGNOSTICS OPTION
SERIES LVS 120/277 ELN SD and LVS2 120/277 ELN SD
CAUTION: For safety and proper operation, read and follow instructions carefully before installation.
IMPORTANT SAFEGUARDS
1.READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
2. Before wiring to power supply, turn off electricity at fuse or circuit
breaker.
3. Disconnect A.C. power and Power Plug before servicing.
4. Refer to wiring diagram sheet for proper connections.
5. Be sure unit is wired to AC power before power plug is connected.
6. All servicing should be performed by qualified personnel.
7. Consult your local building code for approved wiring and
installation.
8. Do not use outdoors.
9. Do not mount near gas or electric heater.
10. Fixture must be grounded to avoid potential electric shock.
11. Equipment should be mounted in location and at heights where it
will not readily be subjected to tampering by unauthorized
personnel.
12. The use of accessory equipment not recommended by the
manufacturer may cause an unsafe condition.
13. Do not use this equipment for other than intended use.
SAVE THESE INSTRUCTIONS
Important Note: This Instruction sheet supple-
ment is to be used in conjunction with the Installa-
tion Instructions provided with the unit.
EMERGENCY LIGHTING SYSTEMS
TEL: 800-334-8694 Fax: 770-981-8141 www.lithonia.com
U.S. Patent No. D383,501