INSTRUCTION MANUAL
LHS300
LHS300
litheaudio.com/hole-saw
This adjustable hole saw from Lithe Audio is designed
to make mess-free, accurate and fast circular holes for
ceiling speakers (as well and downlight fittings).
This tool is capable of cutting round holes of 40mm -
300mm diameter with a max. cutting depth of cut -30mm
(max. 1 mm in metal)
THIS KIT CONTENTS:
•
2x Tungsten Carbide Tipped blades (TCT)
used for cutting aluminium, sheet iron, plastic & wood.
•
2x High Strength Steel blades (HSS)
used for the cutting of wood and plastics.
•
2x locking key’s
•
Allen Key
•
Pilot drill bit
•
Protection cowl and dust Catcher
CEILING SPEAKER
HOLE SAW
BEFORE USE PLEASE READ COMPLETELY AND USE THE PRODUCT
IN ACCORDANCE WITH THESE SAFETY INSTRUCTIONS.
CAUTION - READ BEFORE USING THE PRODUCT
•
When cutting into walls, floors or ceilings, ALWAYS check to ensure that no electric cables
•
or water pipes etc are in the vicinity of the proposed cut.
•
ALWAYS keep the cutting blades sharp.
•
DO NOT use undue force, or too great a drill speed (see chart overleaf)
•
Ensure the cutting blade holders are tight before use.
•
ensure the cutting blades are the correct way round
