Lite-On Technology Corp.
Industrial Automation
215
10.2.1.
Size of the motor fixed screw
The motor must be fixed with the screw in the
recommended size.
If not, the motor lifetime may be
shortened and the motor would no
longer be fully functional.
If the motor is integrated into the reducer, the leak might
leak from the output shaft into the motor. In this case, it is
required to order the motor with oil seal.
If not, the motor lifetime may be
shortened and the motor would no
longer be fully functional.
Motor fixed screw
Model of the servo motor Fixing hole
Recommended screw
MM500, MM101
2-φ4.5
Above M4 X 12 mm
MA201, MH201
4-φ5.5
Above M5 X 12 mm
MA401, MH401
4-φ5.5
Above M5 X 12 mm
MA751, MH751
4-φ6.6
Above M6 X 14 mm
MM102, MH102
4-φ9
Above M8 X 18 mm
MM152, MH152
4-φ9
Above M8 X 18 mm
MM202
4-φ9
Above M8 X 18mm
