Instructions for use
SCU 835 / SEC 15
6.15.2
Alarm transponder 808623 (Honeywell/ESSER)
Mounting the adapter plate for
808623
:
The sensor control unit
SCU 835
has to be opened for mounting the adapter plate.
Insert the provided combi-screws
M4x6
on the back of the adapter plate through the marked holes and fix
the spacers
M4x10
clockwise on the front as shown.
Alarm transponder
808623
as shown in the illustration, push onto the spacers and snap into place.
Insert the adapter plate with
808623
into the housing bottom of the
SCU 835
and fix it clockwise into
the threaded sockets with the provided
M5x8
and
M3x8
fastening screws. Please note the corresponding
torque (
M5x8
with
2.2 Nm
resp.
M3x8
with
1.1 Nm
).
Page 70/112
LISTEC GmbH
60T328-02-LI-en / 29.01.2021
Fig. 161: Fix the spacers
M4x10
Fig. 160: Insert the combi-screws
M4x6
Fig. 163:
808623
locked
Fig. 162: Click on
808623
Fig. 165: Fix the adapter plate
Fig. 164: Insert the adapter plate with
808623
into
SCU 835
PZ1 / PH2
PH2
8
