Safety
Deslagging machine SBM-M 1000/1500 D2
9
2.3. Personnel selection and qualifications
Only responsible and authorised personnel of legal minimum age may work
on the machine.
Personnel who are being trained or orientated on the machine may only
work on the machine under continuous supervision of an experienced
person.
Only use trained or orientated personnel. Clearly establish responsibilities
of the personnel for operating, maintaining and servicing.
Establish a machine operator responsibility. The machine operator may
refuse to follow instructions that are contrary to safety.
2.4. Transport
Only use lifting gear and load carrying equipment with sufficient lifting
capacity during loading work.
Name an expert instructor for the lifting process.
Only lift the machine properly with the lifting gear according to
instructions in the operating manual. Only use the provided attachment
points for the load carrying equipment.
Only use suitable transport vehicles with sufficient load capacity.
Reliably secure the machine during vehicle transport. Use suitable
attachment points.
Even when moving the machine only for a short distance, disconnect the
machine from the power mains!
Perform recommissioning after transport only according to the operating
manual.
2.5. Normal operation
Before beginning work become familiar with the operating location and
working environment. The work environment includes, for example, work
area obstructions, floor load carrying capacity and assistance options in
case of accidents.
Only operate the machine in a safe and functional condition.
Refrain from working in any manner that is questionable in regard to
safety.
Immediately stop and secure the machine in case of malfunctions.
Immediately correct malfunctions.
At least once per shift check the machine for externally recognisable
damage and deficiencies. Report any changes occurring (including
operating behaviour) to the responsible department or person. If
necessary, immediately stop the machine and secure it.
