Product description
3.3. Control elements
Abb. 3:
Control and display elements (front side SBM-M 1000/1500 D2)
13
Screen (touchscreen monitor)
14
The positioning button is used to set the material thickness and for
positioning the machining units
(depending on the setting of the gear switch)
15
Feed speed controller for feed speed to set the speed of the
conveyor belts
16
Feed switch to switch the conveyor belts on/off
(right forwards, left reverse)
17
EMERGENCY OFF button
18
On switch (green) and off switch (red) for the impact motors
19
Display phase sequence incorrect (phase sequence incorrectly
switched)
20 Operating
hours
counter
21
Display of motor malfunction
(illuminates once the motor overload switch has been activated)
Deslagging machine SBM-M 1000/1500 D2
17
