Product description
3. Product description
The SBM-M 1000/1500 D2 deslagging machine is described below.
3.1. Appropriate usage
The deslagging machine SBM-M 1000/1500 D2 is exclusively for dry
removal of slag residue deposits after flame cutting or autogenous cutting of
steel and stainless steel sheets in compliance with the information contained
in this operating manual. Workpieces up to a warpage of maximum 3mm can
be processed.
Belonging to intended use are:
Knocking off slag residues after flame, autogenous and plasma cutting
Use for any other purposes is non-intended use.
The machine must only be installed in an indoor space, which meets the
following conditions:
Fortified, level floor with a load carrying capacity of at least 2.5 t
Temperature range from +10° to +40°C
Humidity 5 – 95 % (not condensing)
Non-intended use explicitly includes the machining of workpieces
made of aluminium or aluminium alloys as well as melting of steel.
The manufacturer accepts no liability for damages which occur for use which
is non-intended use.
14
Deslagging machine SBM-M 1000/1500 D2
