Lisheng LS-A8 User Manual Download Page 1

1

 / 

11

Lisheng (Fujian) Communications Co., Ltd.               

LS-A8 VHF User Manual

Radio View: 

NO. UNIT 

REMARK 

Antenna 

Transmit/Receive signals, deliver wider communication 
coverage.

2 Speaker 

 

Channel Selector Knob 

Turn the knob to select the channels from 1-16. 

Power / Volume Knob 

Turn clockwise to switch on the radio, and turn 
counter-clockwise until a “click” is heard to switch off the 
radio. Turn the knob clockwise to increase the volume, and 
turn counter-clockwise to decrease the volume. 

LED Indicator 

Receiving: Green Light bright, 

Transmitting: Red Light bright. 

6 MIC 

Microphone 

PTT (Push-To-Talk) Key 

Press and hold PTT key to transmit, and release it to 
receive.

SP/MIC cover 

Dustproof and Rainproof 

9 Battery 

Pack 

 

Side Button PF1 

Side Button PF2 

10

Side Button PF3 

You can short press (0.5S) or long press (2.5S) Side Button 
to enable the specified functions which can be programmed 
via the software. Press this key to activate the function (you 
will hear 1 Beep sound) and press again to quit (you can 
hear 2 Beep sound). 

Summary of Contents for LS-A8












Reviews: