40
iFerm Nano Terminal
Special functions
40
6.8
Universal sensors*
If the
Universal sensors
special function is enabled, you can activate the ID 21, ID 22 and ID 23 in
order to incorporate additional sensors, e.g. for measuring CO
2
, pressure and moisture. Suitable
sensors can be obtained from LiquoSystems customer service, see
. Here, a
iFerm Nano Top US ID21-23
is required for this.
Attention!
You may only commission sensors that are correctly connected to the
controller!
¨
Observe the installation documentation for the sensors and ensure
that they are connected correctly.
6.8.1
Universal sensors – detail view
●
Requirement
: One or more IDs must be defined as universal sensors.
Button / area
Brief description
Universal sensors example
● ID 21: CO
2
sensor
● ID22 Pressure sensor
● ID23 Moisture sensor
>
¨
Open the detail view of a device
defined as a universal sensor (ID 21-23).
Home
>
Universal sensor
For the IDs for which universal sensors are
activated, a pressure gauge is displayed in
the device view instead of the thermome
-
ter as the operating mode symbol.
The green hand in the header indicates
that it is a manually controlled device; the
possible alarms for exceeding and falling
below work in the same way as those for
temperature measurement.
¨
Open the further settings.
