Page 88 of 130
Operating instructions
4point light 10W (V 4.58)
3.
Select “Device” from the settings menu by clicking [
] or [
]
4. Confirm selection with [RET]
8.10.1 Device
Under the menu item “Device Settings” date, time and loading parameters of the internal
batteries are set, also the contrast of the LCD display and the startup mode. Furthermore
the Tomography mode option “response to key stroke” can be activated or deactivated at
this point.
DEVICE SETTINGS
Clock Battery LCD
Startup Tom. wait
Fig.. 8.95: Device menu
Menu item
Function
Clock
Set current date and time
Battery
Set charging parameters of the batteries
LCD
Adjust the contrast of the LCD display
Startup
Set the startup mode
Tom. wait
Tomography mode: response to key stroke active/inactive
Tab. 8.67: Device
– menu items
1.
Select “Device” from the menu by clicking [
] or [
]
2. Confirm selection with [RET]
Clock
16.10.2008 10:13:35
<RET> Set
<ESC> Cancel
Fig. 8.96: Set current date and time
Key assignment
Reaction
[0]
… [9]
Input numerical values
[RET]
Confirm and save input
[ESC]
Cancel input, go back to the settings menu
Clock