Operating instructions
4point light 10W (V 4.58)
Page 73 of 130
G
M
L
If data transfer was successful the display shows the following message:
Receive Parameter
Parameter set: 2
Header ok.....
Finished! 150 sets
Fig. 8.69: End of data transfer
3. Continue with [RET] or [ESC]
The instrument can save 10 parameter sets. They are numbered from 0 to 9. In order to be able to
receive a new parameter set, the status of the selected number must be "Empty". If the number is
already in use, the status line shows a dat
e and a time instead of "Empty”. The data cannot be
overwritten. Another number has to be selected.
8.6.2 Edit
Edit parameter set
Parameter set: 0
13.10.2008 15:04:05
Fig. 8.70: Select parameter set
1. Select parameter set with [
] and [
]
2. Confirm selection with [RET]
Set: 0 Line: 1/4
A4 B0 M3 N0
A4 B0 M2 N0
A4 B0 M1 N0
Fig. 8.71: Select electrode combinations
Menu item
Function
Set: 0
Number of parameter set
Line: 1/4
Cursor position: in line 1 of 4
A4 B0 M3 N0
Electrode combination
Tab. 8.53: Edit
– menu items