Rev: 01.07.22
Page 7
CCD-0001459
Always make sure that the slide-out room path is clear of people, pets and objects before and
during operation of the slide-out. Always keep away from the gear racks when the slide-out room
is being operated. Obstructions in the slide-out room's path can cause serious personal injury,
severe product or property damage .
Operation
Prior to Moving the Slide-Out Room
1.
Make sure the engine or generator is running to ensure ample voltage is being supplied to the
slide-out controller.
2.
Set the parking brake if applicable.
Extending the Slide-Out Room
1.
The engine or generator must be running, or unit must be plugged into shore power.
2.
Transmission must be in park or neutral (if applicable).
3.
If applicable, set the park brake and level the unit.
4.
If equipped, remove the transit bars.
5.
If equipped, turn "on" the on/off switch or key.
6.
Press and hold the OUT button (Fig. 8A or 9A). There will be a slight delay before the slide-out room
will begin to move. This is normal.
7.
Release the button when the slide-out room is fully extended and stops moving.
NOTE:
Once the room stops moving, it is not necessary to press the switch a second time.
8.
If equipped, turn "off" the on/off switch or key.
Retracting the Slide-Out Room
1.
The engine or generator must be running, or the unit must be plugged into shore power.
2.
If applicable, transmission must be in park or neutral.
3.
If applicable, set the park brake and level the unit.
4.
If equipped, turn "on" the on/off switch or key.
5.
Press and hold the IN button (Fig. 8B or 9B). There will be a slight delay before the slide-out room will
begin to move. This is normal.
6.
Release the button when the slide-out room is fully retracted and stops moving.
NOTE:
Once the room stops moving, it is not necessary to press the switch a second time.
7.
If equipped, turn "off" the on/off switch or key.
8.
If equipped, install the transit bars.
Moving parts can pinch, cut or crush. Keep clear and use caution.