4
lippert.com
432-LIPPERT (432-547-7378)
Rev: 04.28.22
Lippert Insight Back-up
Camera LCD Display Kit
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004028
4.
Select camera pairing
(Fig.9A)
Operation
1.
Turn on tow vehicle marker/running lights to ensure that
the camera is powered.
2.
Display screen will power up, with screen shown
(Fig. 7)
.
Fig.7
display
menu bars
Fig.8
3.
In the top left corner are three menu bars
(Fig.8)
. Tap the
menu bars to navigate to the main menu.
Fig.9
A
Fig.10
A
reset button
Fig.11
Fig.12
LED Lights
5.
Exit vehicle and proceed to camera location on the back
of the unit
(Fig.10A)
.
6.
On the bottom of the camera is a reset button
(Fig.11)
.
Using a pen or the end of a paperclip, press and hold the
reset button for 15 seconds.
NOTE:
During reset, the four red LEDs
(Fig.12)
around the
camera light should light up for approximately 1 second.
7.
The camera and display should be now be paired.
NOTE:
If camera and display have not paired, repeat
pairing process or refer to “Troubleshooting.”
8.
Tap the menu bars to return to the main menu and
select the desired action.
