background image

2              

lippert.com 

    432-LIPPERT (432-547-7378)   

Rev: 02.21.22

Lippert

 

Liquid  

Propane Sensor

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004544

Introduction

Nobody wants to get to the campsite only to realize they’re 

low on liquid propane (LP). This easy-to-install Liquid 

Propane Sensor (LP Sensor) lets you monitor propane 

levels right from your phone or smart device before you 

leave the house.
Integrated with Lippert’s OneControl

®

 technology, our 

sensors send real-time updates via Bluetooth

®

 (BT) so you 

can stay in-the-know on your RV’s tanks 24x7.
Installation and set-up is effortless: Simply activate the LP 

Sensor with the OneControl app then attach the LP Sensor 

to a vertical steel LP tank with magnets and enjoy the ease 

of having real-time updates. Monitor up to four LP Sensors 

simultaneously from a smart device.
Additional information about this product can be obtained 

fro

lci1.com/support

 or by using the LippertNOW app. 

Replacement kits can be ordered from 

https://store.lci1.

com/

 or by using the LippertNOW app.

The myLCI app is available for free on Apple App Store

®

 

for iPhone

®

 and iPad

®

 and also on Google Play

 for 

Android

 users.

App Store

®

 and iPad

®

 are registered trademarks of Apple 

Inc.
Google Play

 and Android

 are trademarks of Google Inc.

Safety

Read and fully understand all instructions before installing 

or operating this product.
Adhere to all safety labels. 

THE “WARNING” SYMBOL ABOVE IS A SIGN THAT A 

PROCEDURE HAS A SAFETY RISK INVOLVED AND 

MAY CAUSE DEATH, SERIOUS PERSONAL INJURY 

OR SEVERE PRODUCT AND/OR PROPERTY DAMAGE 

IF NOT PERFORMED SAFELY WITHIN  PARAMETERS 

SET FORTH IN THIS MANUAL.

ALWAYS TRANSPORT AND STORE LP TANK IN 

A SECURE AND UPRIGHT POSITION SO THE 

CYLINDER DOES NOT FALL, SHIFT OR ROLL TO 

PREVENT DAMAGE TO THE LP TANK. DAMAGE TO 

LP TANK COULD RESULT IN AN EXPLOSION AND/OR 

FIRE, CAUSING SEVERE PRODUCT AND PROPERTY 

DAMAGE, INCLUDING SERIOUS PERSONAL INJURY 

OR DEATH TO PEOPLE AND PETS.

FOLLOW ALL LP TANK SAFETY INSTRUCTIONS AND 

INSTRUCTIONS FOR DISCONNECTING THE LP TANK 

FROM SERVICE. INSPECT THE LP TANK AND GAS 

APPLIANCES FOR LEAKS.

BATTERIES MUST ONLY BE CHANGED IN AN AREA 

FREE OF IGNITABLE CONCENTRATIONS DUE TO 

EXPLOSION HAZARD.

LIQUID PROPANE GAS (LPG) IS EXTREMELY 

FLAMMABLE. ADHERE TO ALL LP TANK SAFETY 

WARNINGS. WEAR APPROPRIATE PERSONAL 

PROTECTIVE EQUIPMENT (PPE) WHEN HANDLING 

LPG. INSPECT LP TANK FOR LEAKS PRIOR TO 

USE OR SERVICE. DO NOT SMOKE OR HAVE 

ANY IGNITION SOURCES SUCH AS FLAMES OR 

SPARK-PRODUCING ELECTRICAL TOOLS IN THE 

AREA WHILE HANDLING OR TRANSPORTING LP 

TANKS. FAILURE TO FOLLOW ALL LPG SAFETY 

WARNINGS COULD RESULT IN SEVERE PRODUCT 

AND PROPERTY DAMAGE, INCLUDING SERIOUS 

PERSONAL INJURY OR DEATH TO PEOPLE AND 

PETS.

Summary of Contents for 2021130655













Reviews: