3
432-LIPPERT (432-547-7378)
Rev: 08.30.22
Picnic Popup Gazebo
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0006457
Operation
Picnic Popup Gazebo Set up
1.
Find a clear and level site for your shelter. Remove from case
and undo ties
(Fig.2)
. Stand the shelter up on the center hub.
DO NOT USE OPEN FLAME HEATERS IN YOUR
SCREEN TENT. TENT FABRIC WILL MELT WHEN
IN CONTACT WITH HOT SURFACES. USE EXTERNAL
GUY LINES AND STAKES DURING INCLEMENT
WEATHER AND WIND CONDITIONS. FABRIC IS
NOT WATERPROOF.
3.
Enter through the door and push the roof center hub
up until erect. Assemble and install the door poles on
each side of the door. Insert each end of the pole into the
webbing loop
(Fig.4)
.
Fig.2
Fig.4
4.
Stake out the Picnic Popup Gazebo and use the guy
lines. Attach optional sun shade panels with hook and loop
fasteners
(Fig.5,6)
.
Fig.5
Fig.6
Fig.3
B
A
C
2.
Open the shelter with the roof facing up, with the poles
(Fig.3A)
on the inside. Pull out the hub at the center of the
side panels
(Fig.3B)
while holding the roof line with the
opposite hand and stepping on the shelter skirt base to
help pull the side panel out
(Fig.3C)
. Repeat this step for
each side panel.
