Rev: 11.21.2014
Page 5
Euro Loft Bed Lift by Project 2000 Owner's Manual
The user shall guarantee that:
All transport, connection, maintenance and repair operations are carried out by skilled and authorized staff.
Skilled staff is understood as being (pursuant to IEC 364) the staff whose training, education, experience,
information on law and regulations, accident prevention measures and terms of use and service, and who is able to
carry out necessary operations recognizing and avoiding any possible danger and/or damage.
All necessary instructions and information are available to the staff.
The manual must be preserved throughout the whole bed lifting system life and must be handed on to new users
or owners.
The information provided in this manual does not replace safety regulations and technical specifications for
installation and operation which directly apply to the product and its packaging.
This manual is intended to reflect the current state of the art in technique and shall not be considered unsuitable
due to future updates based on new experiences.
The Manufacturer reserves the right to change the manual without incurring any obligation to update previous
versions.
An improper use of the bed lifting system or use different from what described in this manual will automatically
invalidate any warranty term or Manufacturer’s responsibility. The system shall be used by responsible and adult
staff.
It is necessary to carefully preserve this manual, as the Manufacturer shall not be held liable for any damage
to person or property or to the bed lifting system if this was used in an improper or unskilled way, other than
described in this manual or in case of non-compliance with maintenance and safety rules.
Product knowledge and compliance with the instructions provided in these documents are prerequisite to ensure
safety requirements and proper functioning.
It is therefore necessary to keep strictly to the following instructions.
In case of any problem or failure - unless it is to be considered as routine maintenance - it is necessary to contact
our “Customer Service Department” in order to avoid any possible changes affecting product safety, reliability and
function.
However, any operation on the product shall be carried out by skilled and authorized staff.
Our bed lifting systems were designed and manufactured in compliance with current 2006/42/EC directive and UNI
EN 1646-1 regulation.
No safety device may be removed or changed by the Purchaser: the Manufacturer shall be held harmless in case of
breach of the aforementioned rule.
Any change not affecting installed products existence or efficiency shall however be subject to the Manufacturer’s
approval and to tests by bodies responsible for testing, according to the current standards, at the Purchaser’s own
responsibility and expenses.
The Manufacturer provides a 2-year warranty against manufacturing defects for the bed lifting system components.
This manual shall always be available to the user and/or maintenance technician, who shall always be informed
about the correct use of the product and about any possible residual risks.
It must be preserved in a dry, clean environment protected against heat.
Always use the manual so to protect it against partial or total damage.
Do not erase, tear or rewrite its content for any reason. In case of loss of the manual or if further information is
required, please contact your area retailer or the manufacturer.