Lippert Components Project 2000 12600 Series Owner'S Manual Download Page 3

Rev: 11.21.2014

Page 3

Euro Loft Bed Lift by Project 2000 Owner's Manual

System and Safety Information

This manual will enable you to know and use your Euro Loft bed lifting system .
Please read the manual carefully before using the system.
The manual was written for users and/or product maintenance technicians and it is an integral part and of the 

product.
This manual provides information for a correct and proper use and maintenance of the bed lifting system, as well as 

instructions to protect operators.

Target Readers

Target readers of this manual are users and technicians in charge of transport, installation, use, surveillance, 

maintenance and final disassembling of the system.

Purpose Of The Manual

This manual describes the system purpose and use based on its project and technical features; it provides 

instructions for transport, proper and safe installation, mounting, adjustment and use. It provides information for 

maintenance operations, it simplifies spare part order placement procedures and provides insight on possible 

residual risks.

Compliance With Current Legislation

Specific legislation related to work accident prevention must be complied with, as well as the guidelines provided 

in this manual.

Manual Preservation

This manual is an integral part of the system and must be preserved until system final disposal.
The manual must be preserved in a safe and dry environment, protected against UV-rays and it must be available at 

hand near the machine.

How To Obtain An Additional Copy Of The Manual

If this copy of the manual is damaged, a new copy can be requested to the manufacturer at the requesting 

customer’s own expense.

Summary of Contents for Project 2000 12600 Series























Reviews: