Lippert Components Project 2000 12600 Series Owner'S Manual Download Page 19

Page: 19 / 22

Rev: 11.21.2014

Page 19

Euro Loft Bed Lift by Project 2000 Owner's Manual

Bed Lifting System Control Register - Annex 1

Device Type

Model

Serial Number

Manufacturing Year

Yearly Check Date __________ Number of Cycles _________

Yes

Are warning sound signals and lights working?

Are the control devices for lifting and lowering the system working?

Are the control devices for lifting and lowering the system clearly marked so

that they can be correctly identified despite wear?

Are there any clearances in the belt roller/s and the gear motor coupling?

Is the gear motor perfectly working in all of its mechanical functions?

Is the service breaking and parking system working?

Are the bed lifting system belts undamaged and safely fastened?

Are the general conditions of the system good?

Is the system nominal maximum load still clearly and indelibly indicated?

Is the system maximum load still clearly and indelibly indicated?

Are the anchoring elements safely fixed to the roof?

Are security belts well fitted and efficient?

Are lifting and lowering only possible on the top and bottom part of the

mechanical end-of-stroke stops?

Is the system user’s manual available?

Five Yearly Check Date __________ Number of Cycles _________

Yes

General check of the system by an authorized supplier.

Eventual replacement of damaged pieces.

Checks Performed

Year _________
Year _________
Year _________
Year _________
Year _________
Five Yearly Check _________

NOTES: ________________________________________________________________________________________

________________________________________________________________________________________________

NOTES: ________________________________________________________________________________________

________________________________________________________________________________________________

Bed Lift Maintenance Log

Summary of Contents for Project 2000 12600 Series























Search results

Summary of Contents for Project 2000 12600 Series

Reviews:

Lippert Components Project 2000 12600 Series, Owner'S Manual, Page: 19 / 22

Search results

Summary of Contents for Project 2000 12600 Series

Reviews: