2
574-537-8900
Rev: 12.24.19
Flex Guard
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002722
Introduction
The Flex Guard straightens during extension and bends in
an arc as it contracts. This unique design prevents sagging
during slide-out operation as well as unnatural bends that
can lead to breakage.
Additional information about this product can be obtained
from
or by using the myLCI app.
Replacement kits can be ordered from
or by using the myLCI app.
The myLCI app is available for free on iTunes
®
for iPhone
®
and iPad
®
and also on Google Play
™
for Android
™
users.
iTunes
®
, iPhone
®
, and iPad
®
are registered trademarks of
Apple Inc.
Google Play
™
and Android
™
are trademarks of Google Inc.
Features
• Can be installed on any slide-out system that uses
a
1/4
” steel rod or swing arm for the same application.
• Single, double and triple applications.
NOTE:
All kits come with 8” mounting post with star
washer and five Flex Guard clips.
Weight Ratings
NOTE:
The length of the Flex Guard, short or long
application, is determined by which mounting holes
are used. If needed, cut the Flex Guard to create
a short Flex Guard.
Short Flex Guard rating:
• Single - 2 pounds
• Double - 6 pounds
• Triple - 12 pounds
Long Flex Guard rating:
• Single - 1 pound
• Double - 3 pounds
• Triple - 6 pounds
Safety
Read and understand all instructions before installing
or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables
can change the circumstances of the instructions, i.e.,
the degree of difficulty, operation and ability of the
individual performing the instructions. This manual
cannot begin to plot out instructions for every possibility,
but provides the general instructions, as necessary, for
effectively interfacing with the device, product or system.
Failure to correctly follow the provided instructions may
result in death, serious personal injury, severe product
and/or property damage, including voiding of the
LCI limited warranty.
THE “WARNING” SYMBOL ABOVE IS A SIGN THAT
A SAFETY RISK IS INVOLVED AND MAY CAUSE
DEATH, SERIOUS PERSONAL INJURY AND/OR
SEVERE PRODUCT OR PROPERTY DAMAGE IF
NOT SAFELY ADHERED TO AND WITHIN THE
PARAMETERS SET FORTH IN THIS MANUAL.
FAILURE TO FOLLOW INSTRUCTIONS PROVIDED
IN THIS MANUAL MAY RESULT IN DEATH, SERIOUS
PERSONAL INJURY, SEVERE PRODUCT AND/
OR PROPERTY DAMAGE OR VOIDING OF THE
COMPONENT WARRANTY.
THE UNIT MUST BE SUPPORTED PER
MANUFACTURER’S RECOMMENDATIONS BEFORE
WORKING UNDERNEATH. FAILURE TO DO SO MAY
RESULT IN DEATH, SERIOUS PERSONAL INJURY,
SEVERE PRODUCT AND/OR PROPERTY DAMAGE.