Rev: 11.19.20
Page 22
CCD-0002764
Operation
Fig. 37
Always make sure that the Bed Lift path is clear of people, pets and objects before and during
operation. Always keep away from the slide rails when the bed is being operated. Do not allow
people or pets on bed while bed is in motion.
Prior to Operating the Bed Lift System
The bed lifting system must never be used while the vehicle is in motion.
1.
Make sure the vehicle is parked, secured and stabilized before starting operations.
2.
Set the parking brake, if applicable.
Lowering the Bed Lift
1.
Unfasten the safety belt harnesses on both sides of the bed lift.
2.
Turn the key switch to the ON position (Fig. 37D) located on the keypad.
3.
Press and hold the DOWN arrow-shaped button (Fig. 37B) on the keypad. A green LED light
(Fig. 37C) on the keypad will turn on in the direction the bed is moving. The bed will keep moving until
it reaches the pre-set stop position.
4.
The bed will stop moving when the button is released. Continue to press and hold the button until the
stop position has been reached.
5.
Release the DOWN arrow-shaped button.
6.
Turn the key switch to the OFF position.
Raising the Bed Lift
1.
Turn the key switch to the ON position (Fig. 37D) located on the keypad.
2.
Press and hold the UP arrow-shaped button (Fig. 37A) on the keypad. A green LED light (Fig. 37C)
on the keypad will turn on in the direction the bed is moving. The bed lift will keep moving until
it reaches the pre-set stop position.
3.
The bed will stop moving when the button is released. Continue to press and hold the button until
the stop position has been reached.
4.
Release the UP arrow-shaped button.
1.
Fasten the safety belt harnesses on both sides of the bed lift.
2.
Turn the key switch to the OFF position.
A
B
C
C
D
Key
