Lippert Components 799870, Installation And Owner'S Manual, Page: 32 / 36

32
lci1.com 574-537-8900 Rev: 03.02.21
Ground Control
®
TT
Leveling OneControl
®
Touch Panel
(3K-5K)
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002700
5K-Short Jack Manual Override
Top of Jack Motor Override:
Tools needed:
3/8
” drive ratchet and extension (no socket)
1. Find the port on the top of the jack motor (Fig.46A) .
2. Remove the rubber plug (Fig.46A) .
3. Insert the
3/8
” drive ratchet into the port (Fig.47A) .
4. Turn the override until the jack extends or retracts to
desired position.
5. Replace the rubber plug (Fig.46A) .
Jack Manual Override Nut:
Tools needed:
3/4
” socket wrench
1.
Locate the manual override nut
(Fig.45A)
.
2. Place
3/4
” socket wrench over the manual override nut
(Fig.45A) and turn the override nut until the jack extends or
retracts to desired position.
Fig.45
A
Bottom of Jack Motor Override:
Tools needed:
3/8
” drive ratchet and extension,
5/16
” socket
1. Find the port on the bottom of the jack motor (Fig.46B) .
2. Remove rubber plug (Fig.48A) on the bottom of the jack.
Fig.46
A
Fig.47
A
B
3. Insert
5/16
” socket into the port and onto the nut (Fig.49A) .
4. Turn the override until the jack extends or retracts
to desired position.
5. Remove the drive ratchet from the port.
6. Replace the rubber plug (Fig.48A) .
Fig.48
Fig.49
A
A