11
432-LIPPERT (432-547-7378)
Rev: 06.01.22
Lippert Temperature
Sensor
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004546
Troubleshooting
What is happening?
What is happening?
Why?
Why?
What should be done?
What should be done?
Sensor won’t pair with phone.
Mobile device and sensor can’t find each
other.
•
Make sure Bluetooth connection is good
and ensure device has been synced
following the procedure.
•
Make sure smart device’s Settings is
allowing Location to be shared.
OneControl app is incorrectly
reporting temperature.
There is interference between sensor and smart
device.
•
Make sure the smart device’s Bluetooth
setting is on, and the app is setup within
the smart device’s Settings.
•
Try pairing sensor outside of freezer
or refrigerator to make sure working
properly.
•
Try placing on different walls of freezer
or refrigerator.
Sensor improperly placed in freezer or
refrigerator.
Be sure sensor is properly installed (see
Installation section).
Maintenance
Unpairing Sensor
If the sensor is lost or damaged beyond repair, open the
OneControl app and look for the “Unpair” button on the
sensor’s homepage. Unpair the device and dispose safely
like other electronic equipment.
NOTE:
If lost and recovered, the sensor can be paired
again with the smart device.
Changing Temperature (Fahrenheit to Celsius)
To change from Fahrenheit to Celsius, go to the Settings
within the app on the smart device being used
for OneControl.
Know Bluetooth Range
Alerts will be received by the smart device when sensor
is in Bluetooth range. The range varies depending on
obstructions. With no obstructions, Bluetooth range may
extend as far as 300 feet.
When installed, refrigerator or freezer walls can limit range
to 30 or 40 feet.
Look for the Bluetooth icon on the OneControl homepage
to determine if you are in range.
