Operating instructions
Multipurpose Gyration Harrow UKD L/S
18 - 28
06.07.2004 / 00
9. Connecting the universal joint shaft
•
When the unit has been coupled to the tractor, check the exact
length of the universal joint shaft.
Very important:
Highest possible overlapping has to be aimed at. During
operation, the maximum extension of the joint shaft should
be half the overlapping distance of the sliding profile.
(Fig. 3)
When connecting to different tractors, the length has to be
checked again!
•
Press sliding pin and push the joint shaft onto the power take-off
shaft until the sliding pin engages! (Fig. 4)
Fig. 4
Fig. 3