Lipco UFD 100, Translation Of The Original Instructions, Page: 17 / 24

Original instructions Reversing Harrow UFD 100/110/120/140
17 - 24 100102-02-EN BA UFD 100_110_120_140 / 09.08.2019
12. Adjustment of working depth
Turn the compression link for
roller adjustment (Fig. 6) to
adjust the desired working
depth. It is important for the
machine to rest on its roller
while working.
The
LIPCO Reversing Harrow
can be attached eccentrically
by means of the adjustable three-point frame (except for UFD 100).
This is done by loosening the two lock screws and sliding the frame
to the desired position. To lubricate the lateral adjustment, a
lubrication nipple is mounted on the bottom side of the frame (Fig. 7).
As a standard, the
LIPCO Reversing Harrow is equipped with a
laterally adjustable roller. In order to adjust the roller, the two lock
screws at the outer tube of the roller holder (Fig. 8 / A) are loosened,
and the roller is shifted into the corresponding direction.
Fig. 6
Compression link for
roller adjustment
Fig. 7
Locking screws
Fig. 8
A
Lubricating nipple