![background image](http://html1.mh-extra.com/html/lipco/uf-100/uf-100_translation-of-original-instructions_1927002007.webp)
Instructions
Reversing Harrow UF 70/80/90/100 _ 70L
7 - 28
110030-11-EN BA UF 70_80_90_100 UF 70 L / 29.06.2020
6. Accident prevention
Most accidents that occur during work, maintenance or transport of a
machine are due to non-observance of the most elementary rules of
accident prevention.
It is, therefore, necessary that all licensed users (relatives, employees,
colleagues) read and observe the rules given below and written on the
adhesive labels of the machine itself:
•
Turn off the engine of the engine-driven machine, before carrying
out any adjustments, maintenance or cleaning on the machine!
•
Prior to any work on the machine, place the machine on level and
solid ground! When working with the unit lifted, always secure the
unit mechanically by means of adequate supporting elements!
•
In order to achieve the highest possible performance of the
LIPCO
Reversing
Harrow
, it must always be in perfect condition. Only well
trained people may carry out maintenance and repair. Spare parts
must at least comply with the technical requirements specified by
the manufacturer! Only use of
LIPCO original spare parts
will
guarantee this!
•
Before each use, check screws and nuts, especially those of the
cutting blades and the drive, that they are firmly tight!
•
Before starting up, please make sure that no people or animals
are in the vicinity!
•
Take special caution when working alongside roads or pathways!
•
Do not leave the machine running without supervision!
•
During service or repair work, make sure that no one can start up
the machine accidentally!
•
Do not wear wide or loose clothes (e.g. scarves)!
•
Do not, for any reason, climb onto the machine during operation!
Summary of Contents for UF 100
Page 28: ...28 28 Design mail bauer ib com...