Operating Manual
Cross-flow fan unit type GSG-NV1 / 2
40 - 64
010980-26-E BA GSG-NV1_2 / 23.03.2012
18. Preparation of spraying liquid
Prepare only the quantity of plant protection agent needed.
Fill approximately 75% of the calculated water quantity in the
spray liquid tank.
When filling with water from the drinking water supply, do not
immerse water hose in the spray liquid.
Surface water may be used only after obtaining official permis-
sion and if measures are taken to prevent contamination.
The spraying liquid tank can also be filled via an optionally avail-
able external suction unit.
The spray liquid tank is equipped with a hydraulic mixing unit to
keep the spraying liquid in motion and prevent settling.
Hydraulic mixing unit:
Picture missing
Fig. 27
Shut-off valve Fig. 28
33
The mixing unit is switched on and off via the shut-off valve.
Then fill the plant protection agent in the filling strainer and flush
in via the flushing mechanism.