17
Maintaining and servicing your set
Replacing your Square Window Caboose lamp
window
tab
window shell
End frame tab
End frame
tab
hinge
part no. 600-8352-311
or 630-8352-311
Figure 11. Caboose lamp replacement
D
uring the course of normal operations, the lamp inside your caboose may require
replacement. Follow these steps and refer to Figure 11.
1. Lift off the roof from the window shell and body.
2. Pull out the end frame tab from the slot formed by the caboose body and roof. The end
frames are hinged at the platform to swing outward, away from the body.
3. Remove the window shell. To remove the window shell, carefully bend the sides of the
caboose outward while pulling up on the window shell until the tabs are released from the
windows.
4. Pull the lamp straight up and out of the socket. Replace it with Lionel part no. 600-8352-311
or 630-8352-311, available at your authorized Lionel Service Center or Lionel Service.
5. Lower the window shell back into the body, making sure that the tabs snap into the
windows.
6. Reposition the roof above the window shell and body, fit the tabs on the end frames into
the corresponding slots in the body, and press down the roof to secure the end frame tabs.
