8
T
he functions of your locomotive's switches are outlined below. Refer to Figure 4 for the location
of the switches.
The instructions below are specific to this particular locomo-
tive; note that available features (and switches) may differ from other loco-
motives and locomotive sets.
Smoke Unit Switch (SMK/NO SMK)
Used to turn the smoke unit function on and off.
Program-Run Switch (RUN/PGM)
Used to assign an ID# and to reprogram the locomotive for LEGACY and Command operation
when the switch is in the PGM position. Also used to “lock” your powered locomotive in a single
direction, or neutral, in conventional operation when the switch is placed in the PGM position.
Odyssey II Speed Control System Switch (ODY/NO ODY)
Used to turn the Odyssey II Speed Control System on and off.
LEGACY RailSounds Sound System Switch
Used to select RailSounds (RS) or SignalSounds (SS). In the RailSounds position, all sounds
are provided. In the SignalSounds position, only the Horn and Bell are heard.
Locomotive basics
Locomotive switch locations
Figure 4. Switch locations
SMK
NO SMK
RU
N
PGM
RS
SS
OD
Y
NO OD
Y
Smoke unit switch
LEGACY RailSounds sound
system switch
Odyssey II Speed Control
System switch
Command reverse unit
switch
