Linx 7900 Quick Start Manual Download | Manualshive

Page: 38 / 81

background image

Chapter 2: Get started

FA69315–3 English

25

Linx 5900 & 7900 Quick Start Guide

If the jet is running:

Press the red [stop] key. The printer displays a prompt message similar to
that shown in Figure 2-13 on page 24 that asks you to confirm that you
want to stop the jet.
Press the

Yes

key to stop the jet. The Printer Status area displays the

message “JET STOPPING”.
After approximately 4 minutes, the jet is stopped. The Printer Status area
indicates that the jet is “IDLE”.

If the power-down functions are not enabled:

The printer remains in the “IDLE” state.
To turn off the printer, press the red [stop] key. The printer displays a
prompt message (see Figure 2-13).
Press the

Yes

key to turn off the printer.

If the power-down function is enabled:

The printer displays the message:

“You have 10 secs to cancel the power down.”

The displayed number changes every second (9, 8, 7...) until it reaches 1.

•

If you do not press a key, the printer turns off when the displayed
number reaches 1.

•

If you press any key before the displayed number reaches 1, the
power-down sequence is cancelled and the printer does not turn off.

NOTE: You can leave the mains power supply switch at the rear of the

printer in the on (

I

) position.

«
...
36
37
38
39
40
...
»

Summary of Contents for 7900


















































































Reviews:

No comments

Related manuals for 7900

Brand: Rayrun Pages: 2

Brand: IDenticard Pages: 2

Brand: 3Ware Pages: 2

Brand: Galcon Pages: 32

Brand: Ohsung Electronics Pages: 18

Brand: Calsense Pages: 74

Brand: Datavideo Pages: 8

Brand: WAM Pages: 62

Brand: walimex Pages: 7

Brand: Walchem Pages: 2

Brand: Walchem Pages: 73

Brand: Walchem Pages: 126

Brand: wallas Pages: 2

Brand: KEENZ Pages: 68

Brand: Bardiani Pages: 96

Brand: Eaton Pages: 4

Brand: BabyActive Pages: 4

Brand: Ashly Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands