Linx 7900 Quick Start Manual Download

Page: 18 / 81

Chapter 1: Before you start

FA69315–3 English

Linx 5900 & 7900 Quick Start Guide

•

Four arrow keys—Up, Down, Left, Right:

•

A green [start] key:

•

A red [stop] key:

•

Four LED indicators:

The LED indicators give you useful information about the state of the
printer.

LED

Colour

If the LED illuminates, it means:

Fail

Red

A serious printer failure. The Printer Status area of the

Print Monitor

page tells you what caused the failure. You may need to contact your
local Linx distributor.

Warning

Red

Printer warning. The Printer Status area of the

Print Monitor

page tells

you what caused the warning.

Ready

Green

The jet runs and the printer is ready to print. The LED is turned off
when printing stops, but the jet may continue to run.

Power

Green

The printer is turned on.

Figure 1-3. LED indicators

start

stop

fail

warning

ready

power

Summary of Contents for 7900


















































































Search results

Summary of Contents for 7900

Reviews:

Related manuals for 7900

Brands by name

Popular brands

Linx 7900, Quick Start Manual

Search results

Summary of Contents for 7900

Reviews:

Related manuals for 7900

Brands by name

Popular brands